Mechanical Maintenance and Engineering Department Silangan Mindanao Mining Company Incorporated * Provides the leadership, direction and control over all surface and underground equipment repair and maintenance related mechanical services. * Directly responsible in the repair, maintenance and installation of equipment and other related machinery such as: - Mobile Plant: * Dump truck, Excavator, Road grader, dozer, Compactor. Light vehicle ; * Load haul dumps(LHD),Low profiles(LPT),Jumbo Drills ; * Shotcrete , mixers and scaler - Fixed Plant: * Batching plant and related loading/unloading facilities. * Mine Dewatering Pumps, Pneumatic drills, drilling accessories * Dewatering Piping and equipment set up and installation. * Generator /power plant * cement mixers and concrete placers * Monitoring and control of mine air supply and fabrication / installation of Ventilation facilities such as: - Shaft sink axial fans ; - Installation of Electric driven compressors and its pipe line and accessories. - Layout and installation air pipe line and vent tubes. - Maintenance/reconditioning of fans, blowers and compressors. * Implement and enforce all safety, health and environmental standards, policies and rules and regulations. * Prepares and implements preventive maintenance schedule on all underground and surface equipment installations and other related equipment. * Prepares, endorse and implement all approved continuous improvement and cost cutting programs. * Responsible for the Planning, forecasting and ordering of logistical requirement of all equipment, machinery and all their related installations consistent to the approved budget. * Prepare and endorse to the Maintenance Manager annual budget and CAPEX requirement. * Prepare monthly reports over all equipment, projects and other related activities under his area of responsibility. * Responsible for the implementation/monitoring and control of approved budget applicable to his area of responsibility. * Implement and enforces all company personnel policies and rules and regulations. * Recommend and implement all approved manpower training and skill improvement. * Coordinate with all other groups/department in carrying out his duties and responsibilities. * Performs other related functions that the Maintenance Manager may assign from time to time.

SAMCO ``AA'' Project Jubail Industrial City Shaybah Inlet Gas Treatment Project Shaybah-Package 1 * Perform concurrent function as Piping-Lead Supervisor. ; * Responsible in leading and directing the team of supervisors in piping construction. * Coordination with subcontractor regarding to their daily activities * Attend meetings and advise Subcontractor the priorities to be taken into consideration. * Attend Internal meeting with other Discipline (if required) for matters to be clarified * Monitor work progress in accordance with their submitted work schedule * Explain to Subcontractor their responsibilities and Scope of Work that matters to their extent of Work if conflict arises. * Review and interpret construction and engineering drawings and specifications, And Check the implementation on site. * Prepare and answer technical queries associated with any piping aspect of the work, as per Sabic standard. * Monitor Equipment/Materials availability to attain as per work schedule. * Keep daily activity progress record and log any problems that may exist, And take immediate action. * Perform routine observation reports, to ensure safety practices always carried out on site. * Inform Group leader about any technical problems that may arise at site to avoid delay. * Prepare daily reports of work progress and man power utilization. * Prepare weekly reports of the total spool erection, isometric weight installed, welded dia. inches of supports and joints and the remaining work front with the materials available. * Co-ordinate with the subcontractors to achieve the target schedule set by the planning. * Issue the work permits ensuring SHE requirements. ; * Conduct safety walk through in the site in co-ordination with the safety department. * Supervision of all piping works and ensures safety and quality standards of the client. * Inspection and approval of all the QA/QC submittals of the subcontractor. * Punch clearing on construction and system punch.

Ras Laffan Port / Qatar Petrolium Al-khor, State of Qatar * Supervision, execution of fabrication and erection of ship repair yard piping system. * Direct and control manpower, site work assignment and manpower distribution. * Review plan and isometric drawings for work shop fabrication and site installation. * Prepare construction drawings and the take off of materials needed in the site installation * Give directives to the Material controller for the preparation and delivery of materials as per daily work plan, to avoid delay and met the target schedule. * Perform routine inspection, monitoring and update of actual work status and evaluate any abnormalities to insure continuing compliance on the client requirement. * Assessments of manpower, tolls and equipment supply to met the work load and schedules. * Review daily bonding reports as per joint and dia. Inch. * Make daily report and one day look ahead schedule. ; * Enhance safety to the people and plant equipments and facilities, to apply HSE principles across all projects technical activities.

Ras Laffan Refinery / Qatar Gas * Reporting to the Mechanical Manager Assign and have direct supervision in the development of mechanical fabrication, installation and punch clearing and commissioning works. * Make work plan, manpower and equipment distribution and scheduling * Assessments of manpower, tolls, equipment and material supply to meet the requirements on work load and schedules. * Make actual material take off, ordering and forecast the procurement to ensure the availability on site as per work schedules. * Site monitoring and update/audit to ensure that the ongoing installation and commissioning works are carried out to comply as per company requirements. * Attain daily coordination meeting with the contractors, sub-contractors and the company representative to make action on the discrepancy and abnormalities of the project to meet the contract requirements. * Enhance to apply HSE principles across all projects technical activities safety to the people, plant equipments and facilities, * Monitor and assist the third party (contractor) in executing of the testing and inspection.

Dubai International Airport Expansion Dubai, U.A.E.

Mining / Exploration Project Nonoc Is. Surigao City * Directs and lead the group in the drilling operations. ; * Forecast and ordering of consumable materials use in the operation. * Prepare daily work schedule and drilling equipment assignments. * Advice the survey personnel to established the staking and tagging of Drilled holes number for the areas to be drill. * Coordinate to the mobile and mining equipment for: - The preparation of access roads. ; - Transferring of drilling equipment and accessories. ; - Water truck delivery and core samples to Assay laboratory. * Make daily reports, for the number of drilled holes. Meters deep drilled and classification of core samples extracted. * Enhance safety precautions on and off the project site works.

Mindanao Container Terminal ( MCTP ) Mitsubishi, Kawasaki, Toyo, Joint Venture (MKTJV) Tagoloan, Cagayan de Oro city * Supervision and execution of the mechanical installation works : - Fire Protection system - Sanitary and Plumbing system. - Control Tower stair pressurization / Ventilation System. * Review and make shop drawing installation details for the clients approval. * Make the inventory of in house materials, forecast & follow up the procurement to ensure the availability on site as per work schedules. * Monitoring and checking of materials used and the actual work status in accordance with the tender documents to ensure continuing compliance on the contract requirement. * Recommends necessary action and solutions needed in the installation as per actual site conditions. * Follow-up the sub contractors of their manpower, materials and equipment supply, to maintain satisfactory work progress to met the target due date. * Enhance safety pre-cautions on and off the project site works. * Attend kick-off meetings and coordination to other services in areas of discrepancy for which corrective action are required. * Update as built shop drawings, as per actual layout & installed. * Provide test and inspection request, fully coordinated with the client. * Performs inspection and functional test to determine the quality of work and materials conform to specification requirements. * Provide documentation of the results of all inspections and test required by the contract documents. * Make weekly and monthly reports.

* Take a routine inspection of plant machinery and its components, And make reports recommendation for servicing or replacement and repair. * Take records and trouble shooting the cause of downtime, and recommends necessary action to eliminate the recurrence of the problem for further upgrade and improve the system. * Conduct physical inspection and testing of newly replace equipment parts and parts, to pass the standard specification and requirements. * Performs functional test and commissioning. * In charge in the mechanical designs, calculation and cost estimates of expansion projects and revised plant set up. * Make evaluation and recommendation of any changes of the machinery set up, as per upgrading the production. * Compilation of all the data's of the equipment and its components for reference and ordering purposes.. * support crew of all major shutdowns and repair. ; * Perform a concurrent function as Copper Flotation Superintendent

• Take a routine inspection of plant machinery and its components, And make reports recommendation for servicing or replacement and repair. • Take records and trouble shooting the cause of downtime, and recommends necessary action to eliminate the recurrence of the problem for further upgrade and improve the system. • Conduct physical inspection and testing of newly replace equipment parts and parts, to pass the standard specification and requirements. • Performs functional test and commissioning

10,000 TPD / Mill Plant Expansion * In charge in the Supervision and execution of mechanical installation works: - Mill structures, Crushing, Conveying, milling machinery and pumping system such as: - Jaw crusher, Vibrating screen, Conveyors, Chutes, Apron feeders - Sag Mills, CIP/CIL tanks and agitators ; - Cyclones, Pumps , valves and pipeline installation. ; - Re-conditioning of equipment and its accessories. ; - Preparation of necessary required fabricated tools and equipment. * Review the detailed working drawing and perspective. ; * Make actual material take off, ordering and forecast the procurement to ensure the availability on site as per work schedules. * Proposed possible solution for the discrepancy and conflict in the installation. * Review all the progress billing of the sub contractors if it conforms against the actual progress of the installation on site. * Enhance safety pre cautions on and off the project site works. * Performs inspection functional test.

Bo. Osorio, Tanza, Cavite * Overall in charge in the supervision and execution of the fabrication and construction of 120 M X 42 m ware house. * Prepare work program and manpower scheduling. ; * Expedition and preparation of materials, tools & equipment needed. * Review plans and drawings and Check the fabrication and assembling of Structural members as per given fabrication drawings. * Perform routine inspection, monitoring and update of actual work status and evaluate any abnormalities to insure continuing compliance on the contract requirement. * Imposed safety measures in the installation and erection of Steel Structures. * Coordination with the clients for any abnormalities and changes made in the fabrication and erection. * Make weekly progress report and prepare progress billing. Control Room Operator July 31, 1993 - Jan. 22, 1994