-Increasing their professional qualifications and strict observance of the requirements for ensuring quality control, industrial safety and environmental protection. - Carry out risk identification and management within the scope of welding work. -Follow the provisions of the quality management system and the requirements of the governing documents of the enterprise and the Project governing the provision and quality control. -Participate in briefings on the quality, safety of work, properly use personal protective equipment. -Develop, review, adjust documentation on the provision and quality control of welding. - To carry out control of inspections, tests and the condition of objects in the process of welding, to participate in inspections within the scope of the welding work. -Interact with the quality control services of the general contractor and subcontractors. -Participate in the analysis of identified problems and violations of the requirements for the quality of welding work. - Participate in the inspection and incoming inspection of the supplied materials and equipment for welding. - To carry out monitoring, inspection and management of construction works within the scope of welding work. - Carry out monitoring and examination of measures to correct inconsistencies identified during welding. -Ensure the completion, management and transfer of materials and documentation that complete the process of construction and installation work within the scope of welding work - To ensure the collection, analysis, processing and transmission of information and data on the progress of welding, as well as regularly transmit them to management. -Perform other work within its competence on behalf of the immediate supervisor.

Ensuring the correct application of the plan and quality procedures on the project and the workplace. Ensuring monitoring / coordination of quality control, assessment, approval and quality coordination, organization and management of personnel responsible for the operation of the project. Implementation of quality control on behalf of the customer for the performance of construction and installation works, quality control of mechanical and erection works of steel structures - trestles and tanks - silos for storing and transshipping grain products,

Inspector of construction control.Inspector for welding and civil works. Professional Experience DUTIES AND RESPOSIBILITIES AS A (Welding Inspector) 1. Responsible for quality control & inspection of piping fabrication activities. 2. Review of WPS, PQR. 3. Witness for Welder Qualifications. 4. Prepare Weld maps. 5. Prepare Inspection reports(Fit-up, Final Visual) 6. Check list Preparation. 7. Co-ordination/Witnessing of all NDT Inspections. 8. Line check, Punch list Preparation, and Hydro test Package Preparation. 9. Prepare Weld maps and As-Built for final document. 10. Preparation & Submittal of QC Dossier and Engineering Document. DUTIES AND RESPONSIBILITIES AS A (Mechanical Inspector) 1.Line checking and clearing the punch items before the pressure test on completed pipelines. 2.Preparation QA/QC documents, site quality plans, inspection test plans, work procedure, welding procedures etc., 3.Witness performance and testing of procedure qualification test assemblies, supervise these activities. 4.Perform inspection on erection and installation of prefabricated pipe lines. 5.Checking the piping materials as per codes and process standard specifications. 6.Preparing take of list as per isometric drawing. 7.Inspection of shop fabrication of piping spools and supports. Visual inspection of plant piping and preparing Punch list after installation. 8.Supervise and Quality Assurance on the erection, mounting and alignment activities of rotating equipments. 9.Witness cleaning / installation of equipments prior to installation. 10.Reviewing the approved quality plans, manuals, scope of work to perform the required inspection. 11.Complete responsibility of planning & supervision to the works of piping Supervisor / Foreman, Welders, Pipe fabricators, Fitters, Grinders, Riggers and Crane operators checking of Material take off list. 12.Reviewing the applicable instruments for inspection with valid calibration certificates. 13.Preparation of Hydro test packages as per PID, Isometric drawings, hydrostatic drawings and all related documents. 14.Witnessing Hydro testing. 15.Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flange face and fittings. Project: Construction of the 1A section of the Achimov deposits of the Urengoy field for full development with the release of the starting complex (20 wells). Construction of pipelines for collecting and transporting gas from gas wells. Implementation of technical supervision, control of HSE requirements, and provision of technical support services for the construction of the facilities of section 1A of the Achimov deposits of the Urengoy field for full development with the release of the starting complex (20 wells). Implementation of quality control on behalf of the customer for the performance of construction and installation works, quality control of mechanical and installation works of the main and technological pipelines, metal structures and reservoirs, cluster wells, electric power transmission lines to the bush of gas wells, gas well construction. Filling of gas wells, construction of roads to them. Control over the availability and correctness of the primary executive documentation (executive schemes, instrumental surveys of assembled structures, engineering communications, general and special work logs), making changes to it in connection with identified shortcomings and defects. Provision of weekly and monthly reporting data on the activities of contractors in the field of HSE, HSE, and forms in accordance with the forms established by the Customer. Certification of welding procedures. Quality control of welded joints, field and process pipelines. Certification of welding procedures, insulation works. Certification of welders at the admission joints. Certification of welding procedures RAD, RD. Monitoring the cleaning and calibration of the pipeline. Preparation of production and executive documentation, delivery of documentation to the "Customer". Control over the compliance of the accepted and completed work volumes (in the form of KS-2, KS-3, KS-6A) participation in certification commissions, inspection and admission to work of personnel in the production of especially hazardous and special works, participation in commissions on testing and commissioning of facilities Completed construction in operation.

Welding NDT QC Supervisor, South Stream Offshore Pipeline Project. ▪ Ensure the supervision/coordination of the welding inspections and the implementation of the Quality Control Plans for welding activities ▪ Check the quality control plans with reference to welding activities ▪ Be aware of welding procedures and qualification ▪ Check welders qualifications ▪ Allocate and coordinate Welding QC Inspectors within the various areas of site activity ▪ Check the availability and adequacy of consumables and equipment / instrumentation used for welding execution and control ▪ Ensure that welding material and equipment are correctly received, stored, preserved and handled ▪ Check that welding consumables are correctly identified and traceable ▪ Implement the inspection, control and test notification process (RFI) ▪ Check the test packages for piping system inspections ▪ Supervises welding works, also checking the precautions taken by the welder to preserve the consumables and operate in adverse atmospheric conditions ▪ Check heat treatment record diagrams ▪ Ensure that inspections and controls are carried out in accordance with the Quality Control Plan and with applicable specifications and codes, obtains the relevant documentation ▪ Check the extent of the repairs made by the various welders, taking any corrective actions where necessary. ▪ Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records are properly retrievable within the final As Built dossier ▪ In case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records ▪ Support the preparation of the welding QC section of the final dossier ▪ Support the data collection and analysis related to welding/welders repair ▪ Support in non-conformity detection and management and follow up ▪ Supervise and optimize NDT activities through all its phases in order to achieve targets, quality and productivity ▪ Supervise the NDT activities of projects for the area of competence, including inspection schedule and collection of NDT Reports ▪ Ensure that the test, controls and inspections are carried out according to reference documentation and prepare detailed NDT procedures to achieve maximum productivity in accordance with client and quality requirements ▪ Supervise and monitor subcontracted activities by reviewing subcontractor tender documents and technical qualifications, provide support in dealing with subcontractors for contractual aspects and carry out audits on subcontractors ▪ Verify availability of spare parts on site, replacing components if necessary, and managing instruments calibration and certifications ▪ Check daily, and prior to start the on site work, that environmental conditions are adequate; otherwise promote measures to protect the work in accordance with all applicable safety standards E.N.I. Saipem S.p.A. Quality Control Officer, South Stream Offshore Pipeline Project. -Implementation On behalf of the customer's quality control for construction and installation work, quality control and mechanical installation works of the main and technological pipelines, steel structures and tanks. -Control Of production of metal subcontractors. -Control Compliance of the product design requirements for quality, compliance with standards of the customer. -Control Availability of the necessary documents for manufactured products. -Control Number of products matching the project requirements. -Continuous Update the list of items required for issue in accordance with the actual implementation stages of construction at the site. A constant monitoring of deviations in the production and manufacture of steel structures, construction management informed about deviations made. -Control Of the implementation of capital construction plans, appropriate volume, timing and quality of construction works. -Implementation Of technical acceptance of the completed construction and installation works and objects, design the necessary technical documentation. -Participation In the work of the commissions on acceptance of construction projects and putting them into operation. -Control Quality of construction companies to eliminate defects, defects in the Commission's terms. -building Quality control of welding and mechanical, civil works at the facility; - Work with customers; - Verification of as-built documentation; - Issuing instructions to the contractor; - Control over elimination of violations; - Maintaining the current documentation; - Reporting. - Incoming inspection of materials, certificates; - Review and approval of welding procedures and non-destructive testing; - Operational control of welding and assembly works; - Participation in the certification of welding procedures and certification of welding specialists production; - Control of non-destructive testing: VIC, ultrasonic testing; - Reporting of the inspection; - Monitoring compliance with safety rules during construction and non-destructive control; - Signing of the primary acts on the work performed, the service confirmation the physical volume of the construction contractor. -Experience Working in a technical oversight. -Knowledge of technical standards, GOST, SP.

Professional Experience DUTIES AND RESPOSIBILITIES AS A (Welding Inspector) 1. Responsible for quality control & inspection of piping fabrication activities. 2. Review of WPS, PQR. 3. Witness for Welder Qualifications. 4. Prepare Weld maps. 5. Prepare Inspection reports(Fit-up, Final Visual) 6. Check list Preparation. 7. Co-ordination/Witnessing of all NDT Inspections. 8. Line check, Punch list Preparation, and Hydro test Package Preparation. 9. Prepare Weld maps and As-Built for final document. 10. Preparation & Submittal of QC Dossier and Engineering Document. DUTIES AND RESPONSIBILITIES AS A (Mechanical Inspector) 1.Line checking and clearing the punch items before the pressure test on completed pipelines. 2.Preparation QA/QC documents, site quality plans, inspection test plans, work procedure, welding procedures etc., 3.Witness performance and testing of procedure qualification test assemblies, supervise these activities. 4.Perform inspection on erection and installation of prefabricated pipe lines. 5.Checking the piping materials as per codes and process standard specifications. 6.Preparing take of list as per isometric drawing. 7.Inspection of shop fabrication of piping spools and supports. Visual inspection of plant piping and preparing Punch list after installation. 8.Supervise and Quality Assurance on the erection, mounting and alignment activities of rotating equipments. 9.Witness cleaning / installation of equipments prior to installation. 10.Reviewing the approved quality plans, manuals, scope of work to perform the required inspection. 11.Complete responsibility of planning & supervision to the works of piping Supervisor / Foreman, Welders, Pipe fabricators, Fitters, Grinders, Riggers and Crane operators checking of Material take off list. 12.Reviewing the applicable instruments for inspection with valid calibration certificates. 13.Preparation of Hydro test packages as per PID, Isometric drawings, hydrostatic drawings and all related documents. 14.Witnessing Hydro testing. 15.Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flange face and fittings.Certification of NAKS (level II) specialist in welding industry (National Agensy of Welding Control)-2017 Certification of NDT (ISO/IEC 17024) VT, RT,UT - specialist of NDT (level II) -2018 Certification of BOSIET-2017 Construction quality control of welding operations on the object; Ensure correct receipt and understanding of information of Steel Subcontractors Control that targets on quality and schedule for detail design are maintained Control and obtain evidence that enquiries procurement activities for steel material purchased by STEEL SUBCONTRACTORS are properly managed (follow up of quantities, approval of shop drawings, follow up of fabrication, schedules) to reach targets, and draw attention to Field Engineering Manager and to Steel Structure fabrication Superintendent of any deviations, Control and review general arrangement drawings and shop drawings spot checks only) for steel structures together with applicable contractual standards. Ensure that quantities are revised and updated each month all along the project. Review with STEEL SUBCONTRACTORS the monthly progress data, Engineering as well as Fabrication. Solve technical issues with STEEL SUBCONTRACTORS in coordination with Field Engineering Manager and Steel Structure fabrication Superintendent. - work with customers; - check of as-built documentation; - granting to the contractor of the regulations; - monitoring the elimination of violations; - maintenance of current documentation; - submission of reports. - Input control of materials, the existence of a certificate; - Inspection and approval procedures welding and non-destructive testing; - Operational control of the welding and installation works; - Participation in certification of technologies of welding and certification of welding specialists production; Control over carrying out non-destructive testing: VIC, UT; - Presentation of the report on the conducted inspection; - Control over observance of safety rules during construction and non-destructive control; - The signing of the primary acts of performed works, confirmation of execution contractor physical volumes of construction.

Professional Experience DUTIES AND RESPOSIBILITIES AS A (Welding Inspector)CSWIP 3.1 1. Responsible for quality control & inspection of piping fabrication activities. 2. Review of WPS, PQR. 3. Witness for Welder Qualifications. 4. Prepare Weld maps. 5. Prepare Inspection reports(Fit-up, Final Visual) 6. Check list Preparation. 7. Co-ordination/Witnessing of all NDT Inspections. 8. Line check, Punch list Preparation, and Hydro test Package Preparation. 9. Prepare Weld maps and As-Built for final document. 10. Preparation & Submittal of QC Dossier and Engineering Document. DUTIES AND RESPONSIBILITIES AS A (Mechanical Inspector) 1.Line checking and clearing the punch items before the pressure test on completed pipelines. 2.Preparation QA/QC documents, site quality plans, inspection test plans, work procedure, welding procedures etc., 3.Witness performance and testing of procedure qualification test assemblies, supervise these activities. 4.Perform inspection on erection and installation of prefabricated pipe lines. 5.Checking the piping materials as per codes and process standard specifications. 6.Preparing take of list as per isometric drawing. 7.Inspection of shop fabrication of piping spools and supports. Visual inspection of plant piping and preparing Punch list after installation. 8.Supervise and Quality Assurance on the erection, mounting and alignment activities of rotating equipments. 9.Witness cleaning / installation of equipments prior to installation. 10.Reviewing the approved quality plans, manuals, scope of work to perform the required inspection. 11.Complete responsibility of planning & supervision to the works of piping Supervisor / Foreman, Welders, Pipe fabricators, Fitters, Grinders, Riggers and Crane operators checking of Material take off list. 12.Reviewing the applicable instruments for inspection with valid calibration certificates. 13.Preparation of Hydro test packages as per PID, Isometric drawings, hydrostatic drawings and all related documents. 14.Witnessing Hydro testing. 15.Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flange face and fittings.• Ensure the correct application of the Quality Project Plan in the workplace. Ensure monitoring / coordination of quality control. Ensure the implementation of quality control plan the project or its parts; • Check the operating procedures, including those related to specific processes. Ensure that the material and equipment is properly received with certificates as per project requirement, stored and processed. Ensure that the materials correctly identified and traceable. • Ensure the implementation of the inspection, process control and test notification. Check within the sphere of competence, test packages provided for the final checks. Ensure the evaluation and inspection records, inspection and test results; • Scan documents certifying tests, controls and inspections carried out and to ensure their orderly collection and management. Checking equipment and procedures that will be used in the tests, controls and inspections, and to agree on the application of the procedures in force with the organization responsible for the work; • check that the tests, management plans and inspection carried out by contractors in accordance with the quality control plan and obtained the relevant documentation, including the requirements of European Directives (where applicable). Support the systematic collection of knowledge learned from other jobs. Ensure the preparation of the documents of the Quality Department for the final transfer of the Client, check the correct implementation and use of database / spreadsheet for tracking report on the Quality inspection, test and registration tracking; • support specialist quality control manager in a relationship with the client and report any problems that can not be solved independently. Ensure the correct application of the updated plan / quality control procedures; • Coordinate with the client on any project relating to the quality department. Ensure proper record keeping and reporting of relevant work and if necessary implement corrective actions; • Coordinate with the centers of a database for tracking the implementation of the developed system pipe. Interact and assist subcontractors performing work system in place (if it is defined by the contract); • Check the proper implementation of the tracking system of pipes in the work of subcontractors through external audits (tracking system pipes); • Provides pipes and welds information for the Technical Requirements. • Perform check stock yards, pipe coating, to ensure that the materials are acceptable, properly ordered, ready for offshore operations, and accompanied by the relevant data (documentation) tracking system pipes. Ensure proper continuity of the data management process along the tracking system of pipes and align the requirements set forth by the Client to the Subcontractor; • to promote and coordinate the improvement of tracking systems of pipes and development functions when necessary; • develop and produce the required reports from Tracking System pipes in accordance with the terms of the approved procedures.

Professional Experience DUTIES AND RESPOSIBILITIES AS A (Welding Inspector)CSWIP 3.1 1. Responsible for quality control & inspection of piping fabrication activities. 2. Review of WPS, PQR. 3. Witness for Welder Qualifications. 4. Prepare Weld maps. 5. Prepare Inspection reports(Fit-up, Final Visual) 6. Check list Preparation. 7. Co-ordination/Witnessing of all NDT Inspections. 8. Line check, Punch list Preparation, and Hydro test Package Preparation. 9. Prepare Weld maps and As-Built for final document. 10. Preparation & Submittal of QC Dossier and Engineering Document. DUTIES AND RESPONSIBILITIES AS A (Mechanical Inspector) 1.Line checking and clearing the punch items before the pressure test on completed pipelines. 2.Preparation QA/QC documents, site quality plans, inspection test plans, work procedure, welding procedures etc., 3.Witness performance and testing of procedure qualification test assemblies, supervise these activities. 4.Perform inspection on erection and installation of prefabricated pipe lines. 5.Checking the piping materials as per codes and process standard specifications. 6.Preparing take of list as per isometric drawing. 7.Inspection of shop fabrication of piping spools and supports. Visual inspection of plant piping and preparing Punch list after installation. 8.Supervise and Quality Assurance on the erection, mounting and alignment activities of rotating equipments. 9.Witness cleaning / installation of equipments prior to installation. 10.Reviewing the approved quality plans, manuals, scope of work to perform the required inspection. 11.Complete responsibility of planning & supervision to the works of piping Supervisor / Foreman, Welders, Pipe fabricators, Fitters, Grinders, Riggers and Crane operators checking of Material take off list. 12.Reviewing the applicable instruments for inspection with valid calibration certificates. 13.Preparation of Hydro test packages as per PID, Isometric drawings, hydrostatic drawings and all related documents. 14.Witnessing Hydro testing. 15.Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flange face and fittings.CPC Oil pipeline expansion project. Tank Farm. Marine Terminal. Onshore facilities. Functional duties. Incoming inspection with act formalization according to Customer requirements, incoming inspection with VMC and E&I, material estimation and compliance with package supporting documentation . Drawing up of punch-lists and as-built documentation of incoming inspection Supporting Company. Quality Management System. Supporting, maintaining quality processes established at Company facility to be in compliance with quality standards. Quality control of construction and installation works with the relevant executive design documentation, procedures incoming inspection of material and equipment to design instruments to customer requirements, using devices and instrumentation VIC, assessment on the integrity and compliance of material and equipment packing lists, the accompanying documents. Check on completeness and accompanying licenses. Drafting claims and repair list, networking with suppliers of products to meet the requirements of the supplied material Contractor Project Management and CPC. Executive management and accounting documentation of incoming inspection and quality control in relation to work on projects. Providing construction supervision, quality control at the facilities of the Project Expansion CPC as well as compliance with the legislation of the Russian Federation on issues of quality and quality control. Training and knowledge of the Regulation: PB 08-624-03, PB 08-342-00, PB 09-560-03, PB 03-605-03. Approved at examination of industrial safety requirements established by the federal laws and other normative legal acts of the Russian Federation Category "A", "B2", "B7", "B8", "B9" Passed the test of knowledge of labor protection requirements for the training program for managers and professionals.

CPC Oil pipeline expansion of process capacity. Novorossiisk. Position: Leading engineer of logistics department. Functional duties: Project management, logistical analysis, storage of equipment and materials CPC Oil pipeline expansion of process capacity “R Kalmykia”, OPS-3,OPS-2. CPC Oil pipeline system Expansion. “Stavropol” area OPS-4, OPS-5 - Actively champions safety. Issues Weekly and Monthly Progress Reports on Contractors Warehousing & Logistics activities. Ensure that material and equipment handling is managed and done by properly authorized, accountable and qualified personnel. Checks construction equipment to make sure they have the proper Certificates for work. Organizes Warehouse audits (physical check of material and paperwork) Performs surplus disposal for equipment/material that Contractors turn over to Company at the end of the project. Advises Company QC for inspections of Equipment/Material upon arrival. Project management to ensure the specifications and a complete set of equipment for the construction of the CPC pipeline, carrying logistic analysis of delivery, storage of equipment and materials, estimating and costing of products. Made pursuant to the plans and procedures for the CPC input control material and equipment inspection for compliance with the customer. Making reclamation and faulty documentation, issuing instructions on the rules of warehousing and storage of materials. Certification and admission of expert level II VIC. Hardware 6.4, 6.5, 6.6, 11.1, 11.2, 11.3

Quality control over the conduct of construction and reconstruction of the tank farm and the drain inlet w / a rack, with the control room and operational services in accordance to technological regulations JSC "Transneft" Organization of technical preparation of production, operational control of production processes, organization of technical training.

Maintain as-built documentation, preparation of acts of the hidden work coordination of changes to project supervision. Monitoring of compliance with industry standards and regulations documenting, safety instructions and comments. Collection and management of permits for construction of the GRO.

Quality control of the construction sub-object of the oxygen plant: the compressor station, the compressor units KG-200, vessels under pressure RTSV-63, -25 GCMR a distillation column DFS, gasifiers GC-150, high pressure piping for air gases (oxygen, nitrogen, argon). Maintain permits and as-built documentation, monitoring of compliance with established processes and modes of production. Monitoring the implementation of plans and measures to ensure industrial safety, technical supervision of pressure vessels and piping

Implementation of management functions avto personnel, repair, service and warranty cars «FORD», design documentation of work performed, diagnostics and fault detection of components and assemblies cars «FORD», monitoring the acceptance and release of serviced cars «FORD»

Senior process engineer pump for pumping oil, petroleum section ballast and wastewater discharge 5, overlapping with that of a locksmith repair process plants 5th grade. Using the system loading of oil in tanks and tankers with traffic services. Operation and maintenance of process equipment. Cleaning of ballast water, oily emulsions, industrial and municipal waste. Maintenance and operation using a coagulant complex purification from Italy. Collection and pumping of oil through the heat exchanger in the cutting tanks, pumping, flotation sludge oil products. Accounting for oil and petroleum products. Pump units used on oil stations of pipelines. Support systems pump units. Tank farms oil-pumping stations. Pipeline valves. Support systems of oil-pumping stations. Drain-liquid berthing facilities, fire safety equipment and tools..